• <rp id="lbre1"></rp><th id="lbre1"></th>
      1. <button id="lbre1"></button>
        1. English

          021-5210 2968

          首頁
          關于我們
          產品中心
          新聞中心
          客服中心
          人才中心
          聯系我們

          訂單查詢

          產品中心
          當前所在位置:首頁>產品中心>檢測/測量>壓力檢測>
          • Vibro-Meter 振動傳感器 CE 680 M511

          Vibro-Meter 振動傳感器 CE 680 M511

          品 牌:VIBRO-METER

          產品型號:CE 680 M511
          產品簡介:

          Vibro-Meter 振動傳感器 CE 680 M511 專為惡劣工業環境中的機械設計 它采用工業標準的2線電壓傳輸技術,具有恒定電流。 輸出信號的靈敏度為100 mV / g。由于加速度計的隔離接地和內部屏蔽,沒有接地回路或框架電壓來干擾測量。CE 680 M511在高溫下具有極低的噪音水平和出色的偏置電壓穩定性。

          • 產品介紹
          • 詳細參數
          • 產品應用
          • 資料下載

          Vibro-Meter 振動傳感器 CE 680 M511

          來自Vibro-Meter®產品系列
          »專為中溫工業應用(-50至+ 120°C)而設計
          »頻率響應:1 Hz至9 kHz:±10%0.5 Hz至14 kHz:-3 dB
          »剪切模式操作,因此不會因熱瞬態而輸出
          »密封適用于惡劣環境
          »表殼絕緣,內部屏蔽
          »ESD保護


          From the Vibro-Meter ® product line
          » Designed for medium temperature industrial applications (−50 to +120 °C)
          » Frequency response: 1 Hz to 9 kHz: ±10 %  0.5 Hz to 14 kHz: −3 dB
          » Shear mode operation, therefore no output due to thermal transients
          » Hermetically sealed for harsh environments
          » Case insulated, internally shielded
          » ESD protection

          Vibro-Meter 振動傳感器 CE 680 M511

          Vibro-Meter 振動傳感器 CE 680 M511

          SPECIFICATIONS
          Note: Unless otherwise stated, all values listed are typical values, referenced at +23°C, 24 VDC supply, 6 mA constant current
          and 120 Hz.
          Operating
          Sensitivity (at +25°C) : 100 mV/g ±5%
          Dynamic range : 80 g
          Transverse sensitivity (maximum) : 5% of axial
          Linearity : 1% up to full scale
          Frequency response (nominal)
          • 3 Hz to 5 kHz : ±5%
          • 1 Hz to 9 kHz : ±10%
          • 0.5 Hz to 14.0 kHz : −3 dB
          Resonant frequency : 30 kHz
          Temperature response
          • Typical deviation
          −55 to +120°C : ±5%
          −55°C : −5%
          120°C : +3%
          Electrical
          Input supply current : 2 to 10 mA
          Supply voltage for current source : 18 to 30 VDC
          Bias output voltage : 12 VDC
          Electrical noise (equivalent g)
          • Broadband: 2.5 Hz to 25 kHz : 700 µg
          • Spectral: 10 Hz : 10 µg/√Hz
          100 Hz : 5 µg/√Hz
          1000 Hz : 5 µg/√Hz
          Output impedance (maximum) : 100 ?
          Grounding : Case isolated, internally shielded
          Reversed polarity : Protected
          Environmental
          Temperature range : −55 to +120°C
          Sealing : Hermetically sealed
          Vibration limit : 500 g (peak)
          Shock limit : 5000 g (peak)
          Base strain sensitivity (maximum) : 0.0002 g peak/µε
          ESD protection : Yes
          Electromagnetic sensitivity (equivalent) : 70 µg/gauss
          Physical
          Sensing element design : PZT ceramic / shear
          Weight (nominal) : 90 g
          Case material : 316L stainless steel
          Mounting : 1/4 - 28 UNF tapped hole
          Mounting torque : 2.7 N•m
          Output connector : 2 pin, MIL-C-5015 style
          Mating connector : MS3106F-10SL-4S or equivalent
          Calibration
          Dynamic calibration at factory. No subsequent calibration necessary.

           

          ORDERING INFORMATION
          To order please specify
          Type CE 680 M511
          Designation Piezoelectric accelerometer
          Ordering number 444-680-000-511

          ACCESSORIES
          Supplied
          Item Type
          • Adaptor studs 1/4 - 28 UNF 1/4 - 28 UNF to M8
          Optional
          Item Type Part number
          • Cable
          EC 318 922-318-000Dxxx
          EC 319 922-319-000Dxxx
          • Mounting adaptor MA 122_012 1/4 - 28 UNF to M6 (with conic base) 809-122-000-012
          • Insulating stud MA 122_021 1/4 - 28 UNF to M6 (with conic base)809-122-000-021

          Vibro-Meter 振動傳感器 CE 680 M511

          CE 680 M511是一款多用途振動傳感器,專為惡劣工業環境中的機械設計。 它采用工業標準的2線電壓傳輸技術,具有恒定電流。 輸出信號的靈敏度為100 mV / g。

          由于加速度計的隔離接地和內部屏蔽,沒有接地回路或框架電壓來干擾測量。
          CE 680 M511在高溫下具有極低的噪音水平和出色的偏置電壓穩定性。

          The CE 680 M511 is an all-purpose vibration sensor designed for use with machinery in harsh industrial environments. It uses the industry standard 2-wire voltage transmission technique with a constant current supply. The output signal has a sensitivity of 100 mV / g.

          Thanks to the accelerometer's isolated ground and internal shield, no ground loops or frame voltages are present to disturb the measurement.
          The CE 680 M511 shows extremely low noise levels and exceptional bias voltage stability at elevated temperatures.

          Vibro-Meter 振動傳感器 CE 680 M511

          第四色男人的天堂|一本到高清无码中文在线|国产原创剧情麻豆在线|日韩精品一区二区中文#;